Roll forming line for 836 Corrugation profile
Material: 0.35-0.75mm BMT Thickness
0.40mm thickness raw material for inspection,
Effective width: 836mm 4
Feeding width: 1000mm
Galvanized Coil, Pre-paint Coil, Tension Grade: 245-300mpa
 Machine Components5 Ton X 1250 Hydraulic Un-coiler
Hydraulic system to expand coil inner hole, Pump motor: 3.0KW
Coil Inner-diameter= 510±30mm. Coil Outer-diameter Max. 1300mm
Load Capacity: Max. 5 Tons, Coil Width Max. 1250mm
Taper wedge expand type instead of Link-connect expanding system
Retarding Motor to turn the coil. Motor：7.5KW
Maintain arm on the top, to avoid coil become loose when stop to be packed
The arm to be driven by pneumatic cylinder, manual control
The air supplier should be provide by the user
Automatic stopping device with limited switch as assistance to control stop/star rotation
Entry roller & Hand shear
Smart cut control, to cut off the end of the final piece of sheet only
Working thickness：Up to 0.6mm
Fixed Base for Cold Rolling Mills
Feeding guide
Base frame made from H-Beam
Chain/sprocket transmission between stations, 16-steps to form
Main motor =7.5KW, Frequency speed control
Max. Line speed of roll former: 15m/min
Stands-frame-design
Rollers manufactured from Cr12MoV, CNC lathes, hard Chrome Coated
Shafts Diameter=ф75/95mm from 40Cr , Precision Machined
Safety guarding cover above the roll former
 
Hydraulic Cutting Device
Stop to cut, Post cut, no slug cut
Cutting tool material: Cr12, Heat treatment
PLC Control System
Control the quantity & cutting length automatically.
Combined with: PLC, Touch Screen ,Inverter,Encoder etc
Cut-to-length tolerance≤± 2 mm
Control voltage 24V
Portable manual controller, FW/REV/STOP/EMERGENCY only
Product Rack
Un-powered, 3 units
|
