WW41-215-430 Profile
Material: 0.48/0.60mm thickness
Effective width: 430mm
Feeding width: 610mm
Tension Grade: G550
Machine Components
3TonX600mm Hydraulic Un-Coiler
Hydraulic system for expansion coil-inner-hole with 4 palms；
Link-connect expanding system
Pump power=1.5KW；
Load capacity=3 Ton；
Coil Inner – diameter =451-530 mm
Coil outer-diameter=Max. 1500 mm
Coiler Width=Max. 600 mm
Entry Bench Un-powered
Manual Pre-shearing device
Un-powered, smart cut control
Lubrication Device
Cartridge configuration design, with full of oil-felt disc cover on the upper and lower shafts
Oil supplier system, equipped with air kettle and air circuit
Manual control box for easy adjustment by hand
The air source should be provided by the buyer
Roll Forming M/C
Gear/Sprocket driving；19-step to form；
Rollers manufactured from Cr12MoV, CNC lathes, hard Chrome Coated
Shafts Diameter=ф75mm, Precision Machined
Main motor =7.5 KW, Frequency speed control
Forming speed：Approx. 12m/min
Protection Mesh Cover Above Roll-former To Avoid Hands Go Inside
Hydraulic Cutting Device
Stop to cut, Post cut, Slug Breaker
Pump motor =3.0KW；Cutting pressure=Max.8MPa
Cutting tool material: Cr12, Heat treatment
PLC Control System
Control the quantity & cutting length automatically.
Combined with: PLC, Touch Screen ,Inverter,Encoder etc
Cut-to-length tolerance≤± 2 mm
Control voltage 24V
|
