Rolling Machine For Electric Cabinet Profile
Feeding Material information:
Thicknesses: 0.80-1.0mm
Cover width: 180mm
Feeding width: 239mm
Suit for GI
Layout
3T X 500mm Hydraulic De-coiler with leveller
Expansion pattern: manual expansion
Link-connect expansion system
Load capacity = Max.3 Tons
Inner-diameter range= 470-540 mm
Driven type: drag off type
Leveler with 7 rollers, 3 rollers on top/4 rollers on bottom
Leveler shaft diameter: 50mm, hard chrome coating
Leveler rollers with motor driven, motor power: 1.5KW
Servo feeding system/Hydraulic Notching system
Support rolls and feeding guide
Servo motor power: 1.3 KW can feed from 0.4-1.5mm
Servo motor brand: Japanese brand
Two hydraulic punching cylinders:
One is for hole punching on the rib
One is for notching on the both sides
Hydraulic power pack: 15KW
Hydraulic power pack working pressure: 16mpa
Pre-notching/punching and post punching/post cutting share the same hydraulic power
Rolling machine
Gear/Sprocket driven system
20 stations to form the YX21-200 profile
Base design in heavy H beam
Frame design in wall plate (18mm) welding as bellow
Rollers material: Cr12MoV, heat treatment, hard chrome coating
Shafts Diameter=ф75mm, Precision Machined
Main motor =7.5KW, Frequency speed control
Maximum forming linear speed: 20m/min；
Safety guarding cover over the rolling machine,
Hydraulic punching/post flying cut
Punching can be selected as Window shades or rectangular hole
Punching selection driven by pneumatic cylinder
Cutting tool material: Cr12, Heat treatment
Cutting without slug, cutting on the notching position
Computer Control System
PLC, Touch Screen
Inverter
Encoder
Cut-to-length tolerance≤±2.0 mm
Control voltage 24V
Control the rolling machine running and cutting off and stacking actions automatically
Control the quantity and length the machine running.
Separated hydraulic bending device
Hydraulic power pack, Pump motor =3KW
Each case needs to be bent by 3 times to form
|
